Audio Technica AT-LP3 Black

rating
AED 1,049

Audio Technica AT-LP3 BlackFeatureFully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPMBalanced straight tone arm with hydraulically damped lift control and restBuilt-in switchable phono/line pre-amplifier with attached ..

  • Ex Tax:AED 999
  • Brand: audio-technica
  • Product Code:qby4806
  • Model Number: AT-LP3 White
  • Item Barcode:  4961310137977
  • Availability:In Stock
  • Geniune Products

Audio Technica AT-LP3 Black

Feature

  • Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 
  • 45 RPM
  • Balanced straight tone arm with hydraulically damped lift control and rest
  • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
  • Switchable pre-amp modes for moving magnet and moving coil cartridges
  • ½" mount universal headshell with AT91R Dual Moving Magnet phono cartridge and long-life diamond stylus
  • Anti-resonance, die-cast aluminum platter with 4 mm thick rubber mat
  • Damped base construction for reduced low-frequency feedback coloration
  • Includes 45 RPM adapter and removable hinged dust cover
TypeBelt-drive turntable, fully automatic
MotorDC servo-controlled
Speeds33-1/3 RPM, 45 RPM
Turntable PlatterDie-cast aluminum
Wow and FlutterLess than 0.25% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio>50 dB (DIN-B)
Output LevelPre-amp “PHONO”: 1.5-3.6 mV nominal at 1 kHz, 5 cm/sec 
Pre-amp “LINE” 129-313 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain36 dB nominal, RIAA equalized
Power Supply Requirements220V AC, 60 Hz
Dimensions434.0 mm (17.1") W x 128.0 mm (5.0") H x 350.0 mm (13.8") D
Weight5.2 kg (11.5 lbs.)
Accessories IncludedAT91R Dual Moving Magnet stereo cartridge with replaceable stylus; 1/2" mount universal headshell; power cord; 45 RPM adapter; removable hinged dust cover; 4 mm rubber mat


 

Write a review

Note: HTML is not translated!
    Bad           Good

Customer Who Bought This Product Also Bought Following Products